Office, DIY, Health, Sports, Crafting, School & Outdoors
JVCC Nomex Felt Tape, 1/8 in. Thick Meta-Aramid Felt
JVCC Nomex Felt Tape, 1/8 in. Thick Meta-Aramid Felt

JVCC Nomex Felt Tape, 1/8 in. Thick Meta-Aramid Felt

Print Page
2 Reviews


Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    White
    Build Case Click icon to learn how to build a case with multiple colors/patterns.
  • Size
    Purchased Most Frequently: 3/4 in. x 300 in. (White)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC FELT-N1 Nomex Felt Tape is made from 100% meta-aramid synthetic fibers which do not ignite, melt or drip and which retain their mechanical properties at elevated temperatures. Meta-aramid is a mid-tenacity fiber rather than a high-strength one, so it stays soft and conformable and handles and cuts much like a conventional felt while still standing up to heat and flame.

At 1/8 in. thick, FELT-N1 is a lightweight and durable option for applications and industries where heat and flame resistance are the requirement. It is also used in high-temperature settings for sealing and for protection against scratches and dents.

Product Features

  • Limiting Oxygen Index of 30, well above the oxygen content of normal air
  • No melting point and no dripping, with good fabric integrity at elevated temperatures
  • Good resistance to abrasion
  • Soft and conformable, cuts and die cuts cleanly
  • Electrically non-conductive
  • Acrylic adhesive with high shear holding power, tested past 10,000 minutes

Product Applications

  • High-temperature gaskets and seals
  • Aerospace
  • Grills and BBQ equipment
  • Military
  • Personal protective equipment and flame-resistant clothing
  • Scratch and dent protection

Sizes

Stocked in 1/2 in., 3/4 in., 1 in., 1-1/2 in., 2 in., 3 in. and 4 in. widths, all on 25 ft. rolls with a 3 in. diameter core. Note that 25 ft. and 300 in. are the same length, so listings quoting 300 in. refer to this same roll. The felt itself runs 0.125 in. to 0.145 in. thick, so 1/8 in. is the nominal figure at the low end of that range.

What To Expect

Meta-aramid felt is rated to 600°F on its own, but that figure applies to the felt, not to the finished tape. The felt has no melting point and holds its mechanical properties at high heat, but the acrylic adhesive is the limiting component and is tested to 400°F (204°C) for short-term elevated temperature exposure. Treat 400°F as the practical ceiling for the tape as an assembly, and expect sustained heat at or near that figure to shorten adhesive life well before the felt is affected.

For the best bond, apply between 50°F and 100°F (10°C to 38°C) to a surface that is clean, dry and free of grease, dirt or other contaminants. The adhesive is not recommended for bonding to cross-linked polyethylene. If your application involves continuous heat rather than intermittent exposure, please use our Contact Us page before ordering so we can help confirm the tape suits your conditions.

This is a high-temperature and flame-resistant material, not a general-purpose felt. If you need felt for crafts, cabinets or furniture protection, our JVCC ACF-06 Acrylic Craft Felt Tape and FindTape Polyester Felt Tape lines are far more economical. For a comparable aramid in a different fiber, see JVCC FELT-K1 Kevlar Felt Tape. Country of Origin: United States.

* Multiple cases may be shipped per package in order to minimize the charge for shipping.

 

Technical Information

JVCC Nomex Felt Tape, 1/8 in. Thick Meta-Aramid Felt
  • Carrier/Backing: meta-aramid (aromatic polyamide) needle-punch felt
  • Adhesive: acrylic   How are adhesives different?
  • Release Liner: paper
  • Thickness: 128 mils (carrier, adhesive) 3 mils (adhesive) 125 mils (carrier)   What is mil thickness?
  • Adhesion: 60 ounces per inch (to stainless steel test panel)
  • Service/Operating Temperature: up to 400°F
  • Application Temperature: 50°F to 100°F
  • Core: 3" diameter
  • Felt Thickness Range: 0.125 in. to 0.145 in.
  • Fiber Denier: 2.0
  • Weight: 8 oz per sq. yd. +/- 10%
  • Fiber Tenacity: 3.5 g/den
  • Shear Adhesion: greater than 10,000 minutes
  • Limiting Oxygen Index: 30
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

FELT-N1 Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1/2 in. x 25 ft.

FELT-N1/ 0525

UPC = 685646491674		33

Single Item (1-32 Items)

1 - 4 Cases (33-164 Items)

5 - 9 Cases (165-329 Items)

10+ Cases (>= 330 Items)

$12.88

$11.51
a 11% discount

$11.42
a 11% discount

$11.32
a 12% discount

N/A

$379.83

$376.86

$373.56

3/4 in. x 25 ft.

FELT-N1/ 07525

UPC = 685646493784		22

Single Item (1-21 Items)

1 - 4 Cases (22-109 Items)

5 - 9 Cases (110-219 Items)

10+ Cases (>= 220 Items)

$18.10

$16.43
a 9% discount

$16.30
a 10% discount

$16.16
a 11% discount

N/A

$361.46

$358.60

$355.52

1 in. x 25 ft.

FELT-N1/ 125

UPC = 685646491681		17

Single Item (1-16 Items)

1 - 4 Cases (17-84 Items)

5 - 9 Cases (85-169 Items)

10+ Cases (>= 170 Items)

$23.51

$21.56
a 8% discount

$21.37
a 9% discount

$21.20
a 10% discount

N/A

$366.52

$363.29

$360.40

1-1/2 in. x 25 ft.

FELT-N1/ 1525

UPC = 686162769063		11

Single Item (1-10 Items)

1 - 4 Cases (11-54 Items)

5 - 9 Cases (55-109 Items)

10+ Cases (>= 110 Items)

$34.96

$32.36
a 7% discount

$32.10
a 8% discount

$31.82
a 9% discount

N/A

$355.96

$353.10

$350.02

2 in. x 25 ft.

FELT-N1/ 225

UPC = 685646493791		10

Single Item (1-9 Items)

1 - 4 Cases (10-49 Items)

5 - 9 Cases (50-99 Items)

10+ Cases (>= 100 Items)

$44.24

$41.14
a 7% discount

$40.80
a 8% discount

$40.46
a 9% discount

N/A

$411.40

$408.00

$404.60

3 in. x 25 ft.

FELT-N1/ 325

UPC = 686162769070		9

Single Item (1-8 Items)

1 - 4 Cases (9-44 Items)

5 - 9 Cases (45-89 Items)

10+ Cases (>= 90 Items)

$65.59

$61.31
a 7% discount

$60.81
a 7% discount

$60.29
a 8% discount

N/A

$551.79

$547.29

$542.61

4 in. x 25 ft.

FELT-N1/ 425

UPC = 685646491698		8

Single Item (1-7 Items)

1 - 4 Cases (8-39 Items)

5 - 9 Cases (40-79 Items)

10+ Cases (>= 80 Items)

$86.58

$81.16
a 6% discount

$80.48
a 7% discount

$79.81
a 8% discount

N/A

$649.28

$643.84

$638.48

Question & Answers

User Reviews

[ viewing reviews 1 through 2 of 2 total ]
GP
Granite-Plus p. Verified Buyer Oct 26, 2018
Fire pit burner
JVCC FELT-N1 Nomex Felt Tape, 1/8 in. Thick Meta-Aramid Felt
I use this tape for a burner cutout on dekton countertop for a fiore pit / outdoor table, so far is doing its job of keeping heat away from the stone.
TP
thomas p. Verified Buyer Jan 22, 2018
looks good.
JVCC FELT-N1 Nomex Felt Tape, 1/8 in. Thick Meta-Aramid Felt
looks good.
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
VIEW CART - or - PROCEED TO CHECKOUT
Continue Shopping
Continue Shopping